Apply for an Instant Trade Account
Best Selling
Grid
List
Enduramaxx 5000 Litre Open Top Tank
Enduramaxx 5000 Litre(1100 Gallon) Open Top Water Tank is made from Medium Density Polymer (MDP)
The Open Top Tanks are impact and chemical resistant, self-supporting, flat bottomed tank is a cost effective answer to water storage or as part of a rainwater harvesting system. Ideal for collection tanks (Rainwater Harvesting), temporary liquid storage and aquaculture.
Features
2"...
Storage Unit with Lockable Door
Storage Unit - Lockable Door
- Made from 100% polyethylene
- Removable internal tray
- Tough and rigid construction
Spill drip tray base only, 45 Litre
Spill drip tray base only, 45 Litre
Ideal for general "housekeeping' matters such as the temporary storage of small containers such as paint pots, grease tins, batteries etc..
They are compact, lightweight and can fit into small areas. The spill trays provide a practical, simple and safe solution for liquid storage, handling and spillage needs.
Square Floor Feeder
JFC EQ4 Square Floor Feeder
The JFC EQ4 Floor Feeder is manufactured from tough, impact and U.V resistant polyethylene and has a smooth, durable, seamless finish for ease of cleaning. This feeder allows the horse to feed in a natural grazing position which slows feed consumption and reduces irritants. 10 litre feed capacity.
1008L Grit Bin (36 cu.ft)
1008L Grit Bin (36 cu.ft)
This 36cu.ft (1008ltr) grit bin is the largest we have available, and given it's sheer size is very popular in commercial circles. These bins have been yellow polyethylene which is extremely tough and more than capable of taking with fully integrated hinge and drain holes in the base, the bin has a capacity to hold up to 1008kg of grit/salt.
These heavy duty grit...
2400 Litre Underground Water Tank
2400 Litre Underground Water Tank
MDPE underground water tank
Made from high-grade MDPE and suitable for clean water storage.(no outlets or any other drillings are supplied with a bare tank)
Recommended Concrete backfill on all underground tanks
Suitable application
Sewage water
Grey water
Potable water
Rainwater storage and harvesting
Underground water storage tanks...
3001 Litre Type AB Air Gap GRP Water Tank, Two piece Divided, Insulated, CAT 5
3001 Litre Two Piece Divided CAT5 Airgap GRP Water Tank - Insulated (25 mm)
Manufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.
Fully WRAS approvedm, and grey colour as standard (other RAL or BS colours...
3500 Litre Underground Water Tank
3500 Litre Underground Water Tank
MDPE underground water tank
Made from high-grade MDPE and suitable for clean water storage (no outlets or any other drillings are supplied with a bare tank)
Recommended Concrete backfill on all underground tanks
Suitable applications
Sewage water
Grey water
Potable water
Rainwater storage and harvesting
Underground water storage...
400L Tipping Wheelbarrow
TWB400 Tipping Wheelbarrow (Blue)
This 400L innovative tipping wheelbarrow is fitted with a galvanised metal frame and roller bearing pneumatic wheels to deliver superior manoeuvrability and smooth handling. It is tough, durable and surprisingly lightweight in use, even with heavy loads.
Tough and durable polyethylene body mounted on to a galvanised metal frame.
Protective steel plate...
60 Litre ATV Sprayer Tank
60 Litre ATV Sprayer Tank
60 ltr (13 gallon) Sprayer Tank Standard tank supplied in natural translucent medium density polyethylene. Colour tanks are available to order.
This 60 litre water sprayer tank is manufactured in natural translucent medium density polyethylene with a 3/4'' BSP male threaded outlet on the underside of the tank and black 8" spring vented screw cap. The tank...
7,500 Litre Water Tank – Non-Potable
7,500 Litre Water Tank – Non-Potable
Enduramaxx’s 7,500 Litre Water Tank – Non-Potable (7m3) is a self-supporting vertical cylindrical tank constructed of UV stabilised MDPE (mid-density polythene). Designed to provide water storage at your convenience for many purposes where either mains water is not required or not available.
Popular uses for this 7,500 Litre Water Tank –...
7,500 Litre Water Tank –Potable
7,500 Litre Water Tank – Potable
Enduramaxx’s 7,500 Litre Water Tank – Potable (7m3) is a self-supporting vertical cylindrical tank constructed of UV stabilised MDPE (mid-density polyethene). Designed to provide water storage at your convenience for many purposes where either mains water is not required or not available.
Popular uses for this 7,500 Litre Water Tank – Potable...
ATV Front Dry Box
The Dry Box is designed to fit on the front frame of larger bikes or on the rear frame of bikes under 250cc. Easily and conveniently installed, great piece of kit for keeping the necessaries dry while you're out and about. The moulded upstands corners can support a bale of hay.
These boxes are moulded in a single piece from strong and durable polyethylene, making them able to take the punishment...
Biosafe Key
Biosafe Key Description
Keys used for Biosafe Tanks
Enduramaxx 600 Litre 60° Base Cone Tank
This 600 Litre Cone Bottom Tank is used where 100% drainage is an advantage. The 60 degree cone bottom tank means that the liquid completely drains while helping address concerns with vortexing. These polyethylene cone tanks are rotationally molded which means there is a consistent wall thickness. This high impact chemical resistant tank is manufactured from high-density food grade polyethylene. This...
Enduramaxx 7000 Litre 60° Closed Top Cone Tank
Enduramaxx 7000 Litre (1140 gallons) Cone Tank with a 60 degree angled base
Cone Bottom Tanks are suitable when a complete drain out of the stored liquid is required (total evacuation). Suitable for indoor and outdoor installations. Tanks require stands to support the conical bottoms. Tanks are manufactured from medium - or high-density polyethylene with U.V. inhibitors and designed for containment...
Harlequin CAP6 Sewage Treatment Plant
Harlequin CAP6 Sewage Treatment Plant For up to 6 People
Harlequin CAP6 is a compact sewage treatment plant designed specifically for domestic installations for up to 6 inhabitants (equivalent of up to a 4-bedroom house). It is a Continuous Aeration Plant which operates using a unique bio-media system and delivers a pollutant removal level of 96.2% whilst also combating common problems associated...
Hotline Off Grid Water Pump Kit - Solar/Battery Power
Hotline Off Grid Water Pump Kit
These water pump kits are simple 12v pumping systems to move large quantities of water from one point to another. The float switch for the pump is attached to the trough, as this rises and falls it activates/deactivates the pump. You don't need any special header tanks, e.t.c this product works perfectly well with just a standard water trough. The pump is provided...
JFC 1 Tonne meal bin - with lockable lid
One tonne meal bin with lockable lid
The JFC One tonne meal bin is the ideal solution for transporting and storing up to 1200kg of feed on the farm.
A strong and durable feed storage bin, with a wide opening at the top and lockable lid. Fitted with a drain-off for ease of cleaning and emptying. It can be easily transported with a forklift, bale handler or loader. The meal bin can be used...
.png)
JFC Flare 6W Solar Wall Light
JFC Flare 6W Solar Wall Light
The JFC Flare is an ideal solution for anyone looking for some self-sufficient outdoor lighting, that won't cost the earth to buy/install and nothing at all to run. It has a long run time and charge quickly as well, which is a bonus on those short winter days. It's recommended that these are installed at around 2-4 metres high so you get the best detection and...
Paxton 73 Litre Hanging Feed Trough
Paxton LF4 Hanging Feed Trough
With it's single piece moulded construction, this 73L hanging feed trough is handy all around the farm, suitable for a variety of stock it really is a handy piece of kit to have available.
Key Features
1.5 meter feed trough.
73 litre capacity.
Versatile hanging trough, easily installed and removed.
Strong & durable MDPE moulding
Smooth,...
PlumbEZ Adjustable 1/2" Part 2 Ball-Cock Float Valve
PlumbEZ Adjustable 1/2" Part 2 Ball-Cock Float Valve
The Adjustable 1/2" Part 2 Ball-Cock Float Valve is a reliable and efficient solution for automatic water level control in cold water storage systems.
Designed for durability and consistent performance, this valve ensures smooth shut-off operation to prevent overfilling while maintaining optimal water levels.
Supplied complete...
1500 Litre GRP Sectional Water Tank, 1.5x1x1 Internally Flanged Base AB Airgap
1500 Litre Sectional Water Tank, Internally Flanged Base (IFB) Airgap
1500 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.
Insulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater...
1340 Litre Bunded Oil Tank
Deso 1340 Litre Bunded Heating Oil Tank
This Quality bunded heating oil tank is suitable for both domestic and commercial fuel oil storage.
Manufactured from high grade Polyethylene, this British made Deso tank is corrosion resistant, has high impact strength and is UV stabilised. All Deso tanks are CE marked and comply with the latest European standards.
1340 Litre Bunded oil tank...
TruckMaster 200 Litre Dispensing Tank
Titan TM200 - Portable Diesel Tank
Titan Truckmaster TM200 portable diesel dispensing tank. This compact portable dispenser comes complete 12V pump and Flap lid. There is also an option to add a digital flow meter to keep track of how much fuel you're dispensing.
This particular tank doesn't require ADR approval under ADR exemption 1.13.1 c. as its capacity is smaller than others in the...
1000 Litre GRP Enclosure with built in tank and 80L/min twin pump
1000 Litre GRP Enclosure with built-in tank and 80L/min twin pump
The unit is designed as a single piece item with an internal dividing wall at full height. One internal section being the wet compartment for the stored water, which is accessed via a lid mounted lockable man way. Beyond the internal dividing wall is the dry side where the booster set is to be positioned. The internal dividing wall...
Aquamaxx Insulated 550 Litre Cold Water Twin Booster Pump set
Aquamaxx Insulated 550 Litre Cold Water Twin Booster Pump set
The AquaMaxx Insulated is specifically designed to supply potable water to homes where mains pressure is insufficient. The AquaMaxx comes complete with a variable or fixed speed control and a powerful submersible WRAS approved pump. The chamber is constructed from Thermosure, an advanced three-stage MDPE polymer providing fantastic...
Clearwater 15,000 Litre Silage Tank
Klargester 15,000 Litre Silage Tanks
Our below-ground Silage Tanks provide a reliable solution for the collection and retention of veterinary/animal waste until such a time as these can be safely pumped out and removed from site.
Product Highlights
Easy to install, with minimal on-site installation time
Optional High-level alarm available for complete peace of mind
Available...
4079 Litre GRP Sectional Water Tank, Totally Internally Flanged (TIF) Divided
4079 Litre GRP Sectional Water Tank, Totally Internally Flanged (TIF) Divided
4079 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.
What's the Divided Section for in a sectional tank?
Tanks with an internal division, which is also known as a maintenance...
470 Litre Ultra Slim Water Tank, Rainwater Harvesting System
Ultra Slim Water Tank - Rainwater Harvesting System 470 Litres
The Super-Slim Rainwater Tank is the narrowest wall mounted tank available and its unique design makes it visually discreet and easy to install. A complete entry level rainwater harvesting system for retrofit, smaller property and installing in a confined space, incorporating a wall tank, filter diverter, rainwater delivery pump and...
750 Litre GRP Pump Enclosure with built in Tank, AG air gap 1500-750
750 Litre GRP Pump Enclosure with built-in Tank, AG air gap
The unit is designed as a single piece item with an internal dividing wall at full height. One internal section being the wet compartment for the stored water, which is accessed via a lid mounted lockable man way. Beyond the internal dividing wall is the dry side where the booster set is to be positioned. The internal dividing wall has...
Klargester 79,000 Litre Water Holding Tank
79,000 Litre Water Holding Tank - Suitable for Non Potable Water Storage
The Klargester Underground Non-Potable Water Holding Tank is a high-capacity, sealed storage unit specifically engineered for non-potable (non-drinking water) applications. Suitable for use in industrial, agricultural, commercial, and landscaping environments, this tank offers a reliable solution for storing grey water, stormwater,...
10,000 Litre Water Tank, Non Potable
10000 litres (2000 gallon approx) water tank
Rotomolded with UV-stabilised, seamless and corrosion-resistant polymer, the Tuffa 10,000 Litre non-potable water tank is extremely strong and durable with a 10-year guarantee, when registered and 20 year design life as standard.
Supplied with a 2-inch BSP bottom outlet, a screened vent and an inspection hatch or screw lid.
Key Benefits
Potable...
1100 Litre Water Storage Tank, Non Potable
1100 Litres (250 Gallons) Water Tank
Manufactured from a specialist grade of Medium Density Polyethylene, Harlequin Non Potable Water Storage Tanks are ideal for the storage of water which is not intended for human consumption. Ideal for the storage of non-potable water at agricultural, commercial, domestic and industrial installations.
Standard equipment includes:
4" Inspection...
Calpeda GXR 13 Submersible Manual Pump with 10m Cable
Calpeda GXR 13 Submersible Manual Pump with 10m Cable
GXR: Single open impeller submersible pumps in chrome-nickel stainless steel, with vertical delivery port. Motor cooled by the pumped water passing between the motor jacket and the external jacket. Double shaft seal with oil chamber. Minimum dimension and high levels of performance, for use in many different applications, head up to 12.7 m and...
Calpeda GXR 9 Submersible Manual Pump with 10m Cable
Calpeda GXR 9 Submersible Manual Pump with 10m Cable
GXR: Single open impeller submersible pumps in chrome-nickel stainless steel, with vertical delivery port. Motor cooled by the pumped water passing between the motor jacket and the external jacket. Double shaft seal with oil chamber. Minimum dimension and high levels of performance, for use in many different applications, head up to 9 m and flow...
Stuart Turner Mainsboost Stormboost 100
Mainsboost Stormboost Pressure Booster Pump - MBF 100-1-15
Suitable for larger properties with multiple bathrooms and outlets, this Mainsboost Stormboost 100 Booster system fits neatly within a standard 600 mm larder style cupboard.
Mainsboost Stormboost MBF 100 once connected directly onto the incoming mains, will deliver up to 12 litres/minute continuous flow at 3.2 bar pressure to multiple...
Coalescer Foam Filter - ns010-018
Coalescer Foam Filter - ns010-018
Klargester Full Retention Separator Foam Filters - ns010-018
Clean regularly and replace when required, this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber
Coalescer Foam Filter - ns3-6
Coalescer Foam Filter - ns3-6
Klargester Full Retention Separator Foam Filters - ns3-6
Clean regularly and replace when required, this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber
GRP Booster Set Enclosure PWH-2x2x1.5
Please note flooring skid is an optional extra, price on application
GRP Booster Set Enclosure PWH-2x2x1.5
Our GRP enclosures are suitable for the protection of a number of items of industrial equipment, including our own water storage tanks, pump sets, valves in fact there is a housing to suit virtually any industrial product.
Used by Gas, Water and Electricity providers and local authorities...
Enduramaxx 1200 Litre Horizontal Water Tank
Enduramaxx 1200 Litre (264 Gallon) Horizontal Water Tank
Features:
UV stabilised to withstand the elements.
Reliable with 5-year guarantee.
Strength through ingenuity of design.
4-point anchorage.
Heavyweight material.
Calibrated tank for measurement of contents.
Baffle Balls improve tanker stability in rough terrain.
1 baffle ball is 355mm in diameter, manufacturer...
4500 Litre GRP Sectional Water Tank, 3x1x1.5 Internally Flanged Base, AB Airgap (IFB)
4500 Litre Sectional Water Tank, Internally Flanged Base (IFB)
4500 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.
Insulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting...
601 Litre GRP Water Tank
600 Litre GRP Water Tank
Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost) Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination...
Coalescer Foam Filter - nsbd024-36
Coalescer Klargester Full Retention Separator Foam Filters - nsbd024-36
Clean regularly and replace when required this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber
HS2.75 230v Submersible Site Drainage Pump
HS2,75 230v Submersible Site Drainage Pump
The HS series are 50 mm (2”) and 80 mm (3”) submersible pumps with motor sizes in 400watt and 750watt. The models HS2.75S and HS3.75S offer increased head and flow capability over the HS2.4S. All models have a solid cast aluminium body, cast iron pump casing and an impact resistant PVC strainer base for durability during robust handling. The...
Stuart Turner Aquaboost iBolt Horizontal single Booster Pump 0506 1H-CMT/8 80 L/MIN @ 5.0 BAR
Stuart Turner Aquaboost iBolt Horizontal single Booster Pump 0506 1H-CMT/8 80 L/MIN @ 5.0 BAR
Aquaboost iBolt range of singe pump 05 booster sets are capable of delivering flow rates up to 8.0m³/ hour and is capable of producing head pressures of up to 9.2 bar. Not only does the Aquaboost iBolt 03 range feature a horizontal multistage pump, it is also controlled by an air-cooled variable...
570 Litres Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5
570 Litres Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval
Product Image is an example only showing a 2 piece tank with AB air gap
Tank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to...
6000 Litre GRP Sectional 2x1.5x2 Water Tank, Internally Flanged Base, Divided, AB Airgap
6000 Litre Sectional Water Tank, Internally Flanged Base (IFB), Divided, AB Airgap
6000 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.
Insulated and WRAS approved for use with potable water. Suitable for a variety of applications including process...